Latest update
Bug fixing
StmDfuUsb - Stm32 firmware updater via usb APK Description
Application for updating firmware of Stm32 CPU via usb cable using USB DFU protocol.
Realization of the application is based on next documents from company STMicroelectronics.
1. AN2606 STM32 microcontroller system memory boot mode
2. AN3156 USB DFU protocol used in the STM32 bootloader
How to use application.
PREREQUISITE
You mobile device must support USB-OTG.
PREPARATION
1. Connect Stm32 board with your mobile device by USB-OTG cable
2. Activate bootloader mode for Stm32. How to do this read in AN2606. In general you should set pins BOOT0 and BOOT1 in correct combination according to model of your CPU.
PROGRAMMING
1. Select file with firmware you want to write.
- Firmware file should be in one of following format
- Intel hex
- Motorola S-Record
- DfuSe (STMicroelectronics DFU format)
- Raw binary
2. Set writing options you need. You can select next options
- Erase only necessary pages
- Unset readout protection if need
- Go CPU after programming
3. Press button "Load file to flash" and wait for finish of operation.
Additionally next operations is available in application
- Erasing
- Checking flash for blank
- Compare flash with file.
You can select this operation via appropriated point in menu.
The application is checked on next models of microcontrollers:
Stm32F072
Stm32F205
Stm32F302
Stm32F401
Stm32F746
Stm32G474
Stm32L432
RESTRICTION OF USING
You can make till 25 firmware uploading fully free.
After you achieved this limit you can purchase one of two services
1. additional 100 uploading
2. unlimited using of application.
How to install StmDfuUsb - Stm32 firmware updater via usb APK bundles for Android
Once you have downloaded an Android App Bundle, you can install it using a dedicated app bundle installer app. You can install .apks, .xapk, split apk files, and unencrypted .apkm files using the Split APKs Installer (SAI). SAI is considered the gold standard for installing app bundles in the Android community. Here’s how to use the SAI app to install split apks. Download StmDfuUsb - Stm32 firmware updater via usb APK file (com.yatrim.stmdfuusb_29_291128.apk) from APKBundles.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.yatrim.stmdfuusb_29_291128.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install StmDfuUsb - Stm32 firmware updater via usb APK, Split APK (APK Bundles) on Windows PC 7/8/10/11 or MAC?
Download StmDfuUsb - Stm32 firmware updater via usb APK file (com.yatrim.stmdfuusb_29_291128.apk) from APKBundles.com to your PC (ex: C://temp/(com.yatrim.stmdfuusb_29_291128.apk), then follow these steps appear on screen.
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Simple install APK on PC by drag and drop file com.yatrim.stmdfuusb_29_291128.apk on Emulator screen
StmDfuUsb - Stm32 firmware updater via usb APK Pros & Cons
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.
