Latest update
Sin(x)/x interpolation
Firmware GPIO mappings can now be configured from the app
Firmware channel settings can now be configured from the app
Maximum number of voltage ranges per channel increased to 8
Support for analog front-ends with inverting configuration
Scoppy - Oscilloscope APK Description
Combine the Scoppy app with a Raspberry Pi Pico or Pico W to create a 500kS/s oscilloscope and 25MS/s logic analyzer.
Key Features:
- Wireless connectivity with the Pico W
- Horizontal scale and position adjustments
- Vertical scale and position adjustments
- Trigger channel and level selection
- Rising edge and falling edge triggers
- Auto and Normal triggering
- Continuous (Run) and Single capture modes
- Memory depth up to 100kpts for single captures
- Vertical and Horizontal Cursors
- Auto or fixed sample rate
- % pre-trigger samples setting
- Signal Generator
--- square wave (100Hz - 1.25MHz)
--- 1kHz PWM sine wave
- X-Y Mode
- FFT
--- Hann, Hamming, Blackman and Rectangle windows
--- vertical and horizontal cursors
--- dBm, dBmV and V vertical units
--- option to display both channels simultaneously
--- option to display the scope window alongside the FFT
- Probe attenuation settings eg. 1X, 10X, custom
Oscilloscope
- Two Channels
- Up to 500k samples per second (shared between channels)
- Time/Div: 5us - 20secs
- Up to 4 configurable voltage ranges per channel (see help for details)
Logic Analyzer
- Eight Channels
- Up to 25M samples per second (per channel)
- Time/Div: 50ns - 100ms
Analog Front End
Connect the input signal directly to the Pico ADC pins for a 0-3.3V input range or build your own analog front end to extend the input range. Several cheap and easy to build open-source designs can be found at oscilloscope.fhdm.xyz. Affordable front ends are also available for purchase at store.fhdm.xyz.
More information
More information including instructions for installing the free firmware onto your Pico or Pico W can be found here: https://github.com/fhdm-dev/scoppy and https://oscilloscope.fhdm.xyz
How to install Scoppy - Oscilloscope APK bundles for Android
Once you have downloaded an Android App Bundle, you can install it using a dedicated app bundle installer app. You can install .apks, .xapk, split apk files, and unencrypted .apkm files using the Split APKs Installer (SAI). SAI is considered the gold standard for installing app bundles in the Android community. Here’s how to use the SAI app to install split apks. Download Scoppy - Oscilloscope APK file (xyz.fhdm.scoppy_1029_2792903.apk) from APKBundles.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (xyz.fhdm.scoppy_1029_2792903.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install Scoppy - Oscilloscope APK, Split APK (APK Bundles) on Windows PC 7/8/10/11 or MAC?
Download Scoppy - Oscilloscope APK file (xyz.fhdm.scoppy_1029_2792903.apk) from APKBundles.com to your PC (ex: C://temp/(xyz.fhdm.scoppy_1029_2792903.apk), then follow these steps appear on screen.
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Simple install APK on PC by drag and drop file xyz.fhdm.scoppy_1029_2792903.apk on Emulator screen
Scoppy - Oscilloscope APK Pros & Cons
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.
